Shot Blasting Peening Equipment

Rotary table shot blasting machine is designed to process workpieces of various shapes and dimensions, castings, forgings, pressed parts, parts made of steel or non-ferrous metals, and parts of fragile materials.

The applications of Rotary table blast machines are mainly for targeted blast cleaning of single/multiple workpieces producing repeatable cleaning results. Placed workpieces on the slowly rotating table, the workpieces are exposed to blast stream from the turbine(s) located on the wall & ceiling of the machine housing.The shot blast process can occur in single batch mode or indexing with multiple batches placed on the rotary table. Depending on the processing mode, the table is open over 360 degrees or divided into different segments. The layouts of the blast wheels on the table-type blasting machine are mainly according to the features of the parts.

The rotary table shot blasting machine offers complete flexibility for your shot blasting operations. Whether you are cleaning welded structures and manufacturing, cleaning and removing castings, or shot peening and strengthening dynamic stress components, the rotary table shot peening machine can help reduce the required production time.

Rotating plate shot blast machine is suitable for surface strengthening of compressed work piece, the work piece is in the turntable and is blasted from vertical direction. Q35/Q36 shot blast machine is suitable for surface rust removal and strengthening of engine connecting bar, gear, shell cover wall, clutch friction part.Choose our turntable shot blast machine, for it has advantages of high productivity, good sealing effect, compact composition and made using high technology. You can use this machine in casting, car, war factory, any foundry place in your needs.

The Rotating Table Shot Blast Machine uses a high-speed rotating shot blasting device to throw the workpiece in the best direction at the top of the chamber,The workpiece rotates with the turntable,The transmission system drives the scraper to turn,The shot sand is sent to the lower part of the elevator through the shot flow tube,Then the elevator is lifted to the separator for separation,The good projectile is continuously used by the shot blasting machine through the shot pipe and the  gate,The broken projectile and dust enter other corresponding pipes for secondary separation.

Rotary table shot blasting machine is suitable for casting and forging and heat treatment workshops to clean flat, thin-walled, anti-collision parts surface of sticky sand oxide and other attachments. deburr and deflash parts in a totally self contained unit. The designed and built as fully integrated blast cleaning systems to handle larger and fragile castings. It can design as single table or double tables according to the production capacity requirement.

Rotary table shot blasting machine provides a cost effective solution for batch cleaning, corrosion removal, cosmetic finishing, deburring, deflashing, rust and heat scale removal, surface texturing a wide variety of products. 

Placed workpieces on the slowly rotating table, the workpieces are exposed to blast stream from the turbines located on the wall & ceiling of the machine housing.

Through shot blasting process, not only can remove the rust on the surface of the workpiece, clean up the rust and dirt on various workpieces, improve the surface quality of the workpiece.

At the same time, it can improve the fatigue fracture resistance of the processed workpiece, prevent fatigue failure, plastic deformation and brittle fracture, and improve the fatigue life of the treated workpiece.

Qingdao xinke Roller Shot Blasting Machine—your go-to solution for efficient surface treatment of medium to small workpieces.   Renowned for reliability in global industries, this machine eliminates rust, scale, and welding residues with precision.​How It WorksLoad workpieces into the rotating drum, which tumbles parts evenly.   High-speed turbines propel steel shots to blast away contaminants, while an automated system recycles and cleans shots for reuse—cutting costs and waste.​Ideal for batch production, boosting output far beyond manual methods.​Premium Finish: Achieves Sa2.5–Sa3 surface roughness, perfect for painting, plating, or bonding.​User & Eco-Friendly: One-touch operation suits all skill levels, with built-in dust control for safe, clean workflows.​Custom Fit: Flexible models adapt to your workpiece sizes and materials, ensuring optimal performance.​

Xinke Drum Shot Blasting Machine is a widely used surface treatment device designed for cleaning, deburring, or finishing metal parts. Rolling drum shot blasting machine cylinder made of cast iron, the internal bolts with a protective plate, the plate has a grid hole and the spiral of the guide ribs, in order to turn the workpiece in the work. There is also a spiral belt for recovering the abrasive between the guard and the drum shell. The whole roller system is supported on two pairs of reels of the frame, and the roller is driven at low speed by the reducer motor driven by chain and sprocket. As the drum speed is low, the casting of the bruises, edges, and corners of the wear are less occur, and because of the role of the abrasive reflection, to clean up the more complex shape of the castings and forgings. The end cover is located at one end of the drum, so the loading and unloading are convenient, and it is convenient to replace the guard and maintenance work.

The machine works by placing parts on a rotating tumble belt, which moves the parts through a blast chamber where they are subjected to high-velocity abrasive media (shot blasting).  The abrasive stream effectively removes contaminants such as rust, scale, or old coatings from the surface, providing a clean and prepared surface for further processes like painting or coating.

The rolling drum machine is suitable for rust removal, descaling and surface strengthening of small castings, forgings, stampings, gears, springs and other parts in machine tools, automobiles, textile machinery, metallurgy, chemical industry, and aerospace industries.It is especially suitable for parts cleaning and strengthening without fear of collision.

Xinke Drum Shot Blasting Machine is suitable for surface rust removal of small work pieces (forging or casting parts) in batch production with many varieties.

It is uniformly clean and highly productive, so it is suitable for cleaning small pieces of work weighing less than 15kg in medium or small-scale foundry or forging workshops.

The high-speed turbine throws abrasive onto the continuous tumbling castings or forgings in the bucket to remove the green sand or scales from the surface.

Machines’ housing is protected by wear-resistant manganese steel liners.

There is another highly efficient tilting barrel shot blasting machine with inclined swing drum developed by our company.

The whole machine is controlled by a PLC with a high degree of automation. It can work as a single machine or connected to production line.

This machine operates through a combination of mechanical movements and abrasive blasting to clean or finish metal parts. As the barrel rotates and tilts, every surface of the parts gets exposed to the blasting media, effectively cleaning them or altering their surface properties.

After the blasting process is complete, the barrel is stopped and returned to its original position. The parts are then unloaded, often through an automatic unloading door or mechanism.

Bridge shot blasting machine is also called horizontal type or mobile type shot blasting machine, it is a surface preparation equipment used to mechanically remove various coatings, contaminants and impurities from concrete floor, or any other hard floor surface, or horizontal steel plate. It is commonly used in applications such as preparing concrete surfaces for further processing or resurfacing, removing old paint or epoxy coatings, and creating textured surfaces to improve adhesion of new coatings or toppings.

Working principle:

The abrasive material stored in the lower part of the separation tank by the feeding tube into the shot blasting parts, blasting wheel at high speed rotation by blasting motor, the abrasive is accelarater to 80m/s clean the surface,high-speed energy pills material impact worksurface, Under negative pressure pills materials and dust back to the dust back to the dust separation box, where they completed the separation of pill material and dust and impurities, good pill material into the shot blasting parts continue to recycle use, dust and impurities are filtered slip to closed set dust collection box waiting to be droped.