Shot Blasting Peening Equipment

Xinke offers a range of roller conveyor shot blasting machine from small simple machines to construction blasters, heavy duty machines and complete preservation lines.

It can be easily integrated into existing production lines.

The roller conveyor shot blasting machine is predominantly used to clean metal plates and profiles in a continuous through feed process. The size of the roller conveyor will be determined according to the size of the workpiece to be processed.

The roller pass shot blasting machine is easy to operate, just load the steel material onto the machine, press the start button, the workpieces pass through the shot blasting chamber on a roller conveyor. Depending on different workpiece, shot blasting is carried out with precisely positioned blast turbines. The blasting result is all-round, comprehensive, and always reproducible.

After a short cycle period, the system will automatically unload the treated material. The entire process is completed, and all dust and residual pellets are removed.

Preservation lines combine the heating (drying), blasting, coating and drying of workpieces such as sheet steel, profiles, pipes or steel structures in one automatic line.

Preservation lines are ideal when there is a lengthy manufacturing or storage time between blasting and final coating. In order to prevent rust returning, a weld primer is applied to provide corrosion resistance for weeks.

Sheet widths of up to 5000mm can be processed, with passage speeds varying from 1.0m/min to 8.0m/min.

In addition, the high-end equipment may use touch screen, computer monitoring and other systems. Electronic control system is a very important part of the steel plate pretreatment line, a better electronic control system can maximize the productivity of the equipment, extend the service life of the equipment, save electricity, paint, heat and labor consumption.

Due to the complex working process of the steel plate pretreatment line, it is basically impossible to manually operate, so the automatic control is a necessary condition for the steel plate pretreatment line. Generally use PLC programmable controller, the most basic is to realize the automatic opening of the equipment to the ready work state, the equipment will automatically collect data after loading, and then accurately judge the shot blasting switch time, control the spray paint width, etc. Audible or optical alarm can be used when the equipment is faulty until the equipment is automatically shut down.

In addition, the high-end equipment may use touch screen, computer monitoring and other systems. Electronic control system is a very important part of the steel plate pretreatment line, a better electronic control system can maximize the productivity of the equipment, extend the service life of the equipment, save electricity, paint, heat and labor consumption.

Xinke preservation line is a highly complex, individually configured surface treatment system that fully automatically pre-heats, derusts, and descales and then applies a temporary corrosion protection – the welding primer – to steel.

Its purpose is to improve the corrosion resistance and fatigue resistance of the steel plate, extend the service life, and optimize the surface state of the steel plate to facilitate subsequent processing.

Preservation lines can take on enormous dimensions, a complete preservation line that can be easily integrated seamlessly into a customized production line, this ensures a flexible production process and a high material output.

Xinke preservation line is a highly complex, individually configured surface treatment system that fully automatically pre-heats, derusts, and descales and then applies a temporary corrosion protection – the welding primer – to steel.

Its purpose is to improve the corrosion resistance and fatigue resistance of the steel plate, extend the service life, and optimize the surface state of the steel plate to facilitate subsequent processing.

Preservation lines can take on enormous dimensions, a complete preservation line that can be easily integrated seamlessly into a customized production line, this ensures a flexible production process and a high material output.

The Mesh belt shot blasting machine is an automated surface treatment system designed to remove scale, rust, welding slag, and burrs from metal workpieces while enhancing surface strength for improved fatigue resistance. Its operating principle includes: Workpieces are evenly placed on a wear-resistant mesh belt, which transports them into the blast chamber via motorized drive.High-speed rotating blast wheels (turbines) propel steel shot or abrasive media at 60–80 m/s onto the workpiece surface, effectively stripping contaminants and creating uniform roughness.  Used abrasives and debris pass through a vibratory screen or airwash system. Reusable media is recycled to the hopper, while dust is captured by the dust collector, ensuring environmental compliance.Treated workpieces exit via the mesh belt, ready for subsequent coating or machining.

Wire Mesh type shot blasting machine is through high-speed projectile impact on the surface of the workpiece, can effectively remove the surface coating and peeling, improve the surface roughness and adhesion of the workpiece ‌, the net belt is one of the important parts of this equipment, it always runs through the whole radial shot blasting belt arranged by the upper and lower shot blasting machine to accept high-speed cutting of the projectile flow for a long time, so the net transmission belt itself has become vulnerable parts. Therefore, the high wear-resistant transmission belt  made of rolled Mn13 is selected to ensure long service life and improve the production efficiency of the equipment.

Wire Mesh type shot blasting machine It mainly has the characteristics of small continuity, high cleaning efficiency, small deformation, no pits, compact structure, environmental protection performance, wide application range, etc., can be used alone, can also be used in multiple combinations.

Wire Mesh belt type shot blasting machine is mainly used for surface treatment and shot blasting strengthening of thin wall casting, thin wall iron, aluminum alloy castings, ceramic and other small work-piece with features of continuous performance, high cleaning efficiency, small deformation, no pit etc. It can be used alone or can be used with other shot blasting machine. 
This machine provides high volume, cost effective performance for all metal processing requirements. They will handlelarge die castings, automotive wheels, ferrous and non-ferrous castings, weldments, fabrications and more. 

Mesh belt shot blasting machine can be used very flexibly and easily integrated into a continuous production line.

Xinke offers large shot blasting machines which allow high volume and complex parts to be shot blasted with no manual blasting. The parts are passed through the shot blaster on a wire mesh conveyor belt. The impurities such as oxide, welding slag and oil on the surface will be removed, and the surface will get a certain roughness, so as to achieve the surface treatment effect.

A highly wear-resistant wire mesh belt, with tension adjustment, provides the part transport. High volume of batches and fast consistent shot blasting can be achieved very easily.

Place workpieces on the conveyor belt, the shot blasting chamber is equipped with powerful turbines around the housing, while the turbines are rotating at high speed, which allows them to treat very complex components, especially workpiece with “pockets” or difficult to reach areas.

Hook-Type Shot Blasting Machine is an industrial cleaning system designed for surface treatment of individual components or small batches. Its core working principle revolves around using centrifugal force to propel small metallic abrasives, known as shot, at high velocity against the workpiece's surface.

The process begins with the workpiece, such as a casting or forging, being securely hung from a motorized hook. This hook transports the part into the fully enclosed blast chamber. Inside, a high-speed rotating wheel called an impeller accelerates the abrasive media, creating a dense, uniform stream that impacts the entire surface of the suspended, slowly rotating workpiece. This impact effectively removes contaminants like rust, scale, sand, and old paint, while also imparting a beneficial compressive stress layer that improves fatigue strength.

After blasting, the hook carries the workpiece to a separate compartment for cleaning. Here, a recycling system separates the reusable abrasive from the removed dust and debris, which is collected for disposal. The cleaned workpiece is then unloaded, leaving a clean, matte-finish surface ready for subsequent coating or further processing. This machine is particularly valued for its flexibility in handling a wide variety of part shapes and sizes without the need for complex fixturing.

The working principle of the hook type shot blasting machine is to drive the shot blasting machine wheel to rotate at high speed through the motor, spray the metal projectile to the surface of the workpiece, remove the dirt, oxide and other impurities on the surface through impact and friction, and enhance the hardness and corrosion resistance of the workpiece‌。

Hook type shot blasting machine The shot blasting room is used to place metal workpieces and shot blasting wheels，Usually consisting of a protective plate to prevent splash;The shot blasting wheel is driven by an electric motor to rotate at a high speed.The projectile is sprayed onto the surface of the metal workpiece;The shot collecting system is used to collect the shot in the shot blasting room to ensure its recycling. The dust removal system is used to purify the air in the shot blasting room and remove dust and impurities generated during the shot blasting process.

the advantages of the Hook type shot blasting machine include good cleaning effect, high production efficiency, cost savings and a wide range of application.It can effectively remove the impurities on the surface of the workpiece, improve the surface finish and roughness, and enhance the hardness and corrosion resistance of the workpiece.At the same time, the hook type shot blasting machine can handle multiple workpieces at the same time, and the processing time is short, which greatly improves the production efficiency.Because it does not use chemicals and does not produce pollutants such as waste water and exhaust gas, it also saves costs.

Hook type shot blasting machine is widely used in metal manufacturing industry, including shipbuilding and repair, automotive industry, aerospace, bridge construction, pipeline treatment and other fields.In these fields, the hook type shot blasting machine is used to clean the welding slag, paint, rust, etc., on the surface of the workpiece, improve the surface finish and corrosion resistance, and provide a good foundation for subsequent processing (such as spraying, electroplating).

The working principle of the hook type shot blasting machine is to drive the shot blasting machine wheel to rotate at high speed through the motor, spray the metal projectile to the surface of the workpiece, remove the dirt, oxide and other impurities on the surface through impact and friction, and enhance the hardness and corrosion resistance of the workpiece‌。

Hook type shot blasting machine The shot blasting room is used to place metal workpieces and shot blasting wheels，Usually consisting of a protective plate to prevent splash;The shot blasting wheel is driven by an electric motor to rotate at a high speed.The projectile is sprayed onto the surface of the metal workpiece;The shot collecting system is used to collect the shot in the shot blasting room to ensure its recycling. The dust removal system is used to purify the air in the shot blasting room and remove dust and impurities generated during the shot blasting process.

the advantages of the Hook type shot blasting machine include good cleaning effect, high production efficiency, cost savings and a wide range of application.It can effectively remove the impurities on the surface of the workpiece, improve the surface finish and roughness, and enhance the hardness and corrosion resistance of the workpiece.At the same time, the hook type shot blasting machine can handle multiple workpieces at the same time, and the processing time is short, which greatly improves the production efficiency.Because it does not use chemicals and does not produce pollutants such as waste water and exhaust gas, it also saves costs.

Hook type shot blasting machine is widely used in metal manufacturing industry, including shipbuilding and repair, automotive industry, aerospace, bridge construction, pipeline treatment and other fields.In these fields, the hook type shot blasting machine is used to clean the welding slag, paint, rust, etc., on the surface of the workpiece, improve the surface finish and corrosion resistance, and provide a good foundation for subsequent processing (such as spraying, electroplating).