Shot Blasting Peening Equipment

Xinke Steel Strip Shot Blasting Machines are specifically designed to used in hot rolling annealing pickling process for carbon steel, alloy steel, or stainless steel strips, the purpose of this design is to remove the oxide skin from the stripe surface. The addition of its function can greatly improve the pickling efficiency, reduce acid consumption, by optimizing the amount of shot blasting machine, can obtain the best descaling efficiency and descaling effect.

The Steel Strip Shot Blasting Machines are specifically designed to used in hot rolling annealing pickling process for carbon steel, alloy steel, or stainless steel strips. It is to remove the oxide skin from the stripe surface. It is an indispensable equipment for hot strip steel production line. All branches of steel producing and manufacturing industries use surface finishing processes. Semi-finished or finished products must be free from rust, scale or contaminants for any subsequent operation.

Pass through shot blasting machines are used in the casting industry, especially in the cast steel and cast iron industries.  In these industries, shot blasting machines are a very common consumer equipment, mainly used to clean the appearance of cast steel and cast iron, sand, scale and other impurities.  In the foundry industry, virtually all steel and cast iron parts are processed by shot blasting machines.  The purpose of this is not only to clean the outer impurities of the casting, but also to check the quality of the casting after the casting is completed.  Products with bad appearance can be stopped directly.

Each shot blasting wheels produce in Xinke must be inspected by the technical inspection department of the manufacturer, the experiment should last longer than an hour.  If the inspector finds a failure during the inspection, a new re-inspection will be carried out, all turbines cannot leave the factory until the quality and passing certificate are passed.

The dust removal system of the pass through type roller conveyor shot blasting machine adopts the pulse reverse blowing vertical filter dust collector, which is stronger than the traditional cloth bag type and the traditional inclined insert filter cartridge.  The vertical arrangement of the filter cartridge is convenient and fast (open the access door), and the disadvantages of the inclined insert arrangement and the dust of the upper filter cartridge falling to the lower filter cartridge lead to the unsatisfactory dust removal effect are overcome.

With the increase of the punishment for environmental pollution, pickling cleaning has been gradually eliminated by the market, and the opportunity of pass through type roller conveyor shot blasting machine has been applied in more and more industries. 

Pass through shot blasting machines are used in the casting industry, especially in the cast steel and cast iron industries.  In these industries, shot blasting machines are a very common consumer equipment, mainly used to clean the appearance of cast steel and cast iron, sand, scale and other impurities.  In the foundry industry, virtually all steel and cast iron parts are processed by shot blasting machines.  The purpose of this is not only to clean the outer impurities of the casting, but also to check the quality of the casting after the casting is completed. Products with bad appearance can be stopped directly.

In addition, the high-end equipment may use touch screen, computer monitoring and other systems. Electronic control system is a very important part of the steel plate pretreatment line, a better electronic control system can maximize the productivity of the equipment, extend the service life of the equipment, save electricity, paint, heat and labor consumption.

Due to the complex working process of the steel plate pretreatment line, it is basically impossible to manually operate, so the automatic control is a necessary condition for the steel plate pretreatment line. Generally use PLC programmable controller, the most basic is to realize the automatic opening of the equipment to the ready work state, the equipment will automatically collect data after loading, and then accurately judge the shot blasting switch time, control the spray paint width, etc. Audible or optical alarm can be used when the equipment is faulty until the equipment is automatically shut down.

In addition, the high-end equipment may use touch screen, computer monitoring and other systems. Electronic control system is a very important part of the steel plate pretreatment line, a better electronic control system can maximize the productivity of the equipment, extend the service life of the equipment, save electricity, paint, heat and labor consumption.

Wire Mesh type shot blasting machine is through high-speed projectile impact on the surface of the workpiece, can effectively remove the surface coating and peeling, improve the surface roughness and adhesion of the workpiece ‌, the net belt is one of the important parts of this equipment, it always runs through the whole radial shot blasting belt arranged by the upper and lower shot blasting machine to accept high-speed cutting of the projectile flow for a long time, so the net transmission belt itself has become vulnerable parts. Therefore, the high wear-resistant transmission belt  made of rolled Mn13 is selected to ensure long service life and improve the production efficiency of the equipment.

Wire Mesh type shot blasting machine It mainly has the characteristics of small continuity, high cleaning efficiency, small deformation, no pits, compact structure, environmental protection performance, wide application range, etc., can be used alone, can also be used in multiple combinations.

Wire Mesh belt type shot blasting machine is mainly used for surface treatment and shot blasting strengthening of thin wall casting, thin wall iron, aluminum alloy castings, ceramic and other small work-piece with features of continuous performance, high cleaning efficiency, small deformation, no pit etc. It can be used alone or can be used with other shot blasting machine. 
This machine provides high volume, cost effective performance for all metal processing requirements. They will handlelarge die castings, automotive wheels, ferrous and non-ferrous castings, weldments, fabrications and more.